G.S.M Activate 4GINTV5-3, Manual

Page: 8 / 13

Text Commands for Gate Entry
To open the gate permanently from your phone you can send a text
# OPEN # This will hold the relay 1 on
To close the gate just ring the simcard number this will reset relay 1 and the gate will close.
To open relay 2 you can send a text
# PED # - this will pulse relay 2
Relay Pulse Time
The default pulse time for each relay is 2 seconds. You can increase this to 10 seconds for
each relay by sending the text
# FAST # - this will set the relay pulse time to 2 seconds # SLOW # - this
will set the relay pulse time to 10 seconds
Microphone and Speaker Volume
There are 7 levels of sound for both the microphone and Speaker, these can be set using the
following SMS text commands
Speaker
# SPK = 1 # - Low
# SPK = 4 # - Medium (default)
# SPK = 7 # - High
Microphone
# MIC = 1 # - Low
# MIC = 4 # - Medium (default)
# MIC = 7 # - High
Please note that the VR1 control on the board controls the keypad volume only
Page 8
www.gsm-activate.co.uk - 01273462380 - sales@gsm-activate.co.uk