Programming Dial to Open Gate Entry (WHL List) (Caller ID)
You can open the gate direct from a mobile phone or landline by calling the simcard number.
Once you call the number the GSM Intercom will reject the call and take the command to
open the gate.
We have a caller ID function controlled by the caller ID text command. If this is set to ON only
the numbers stored in the WHL list will be accepted to open the gate. If it is set to OFF there
is NO caller ID security and any caller can open the gate.
To turn caller ID on send a text message
#
ID
=
ON
#
To turn caller ID off send a text message
#
ID
=
OFF
#
To program a number to the caller ID (whl) list you will need to send a text message code:
#
WHL
=
NUMBER
#
To delete the number send a text message code:
#
DEL
=
NUMBER
#
Example
#
WHL
=
07123456789
#
Stores your mobile number.
#
DEL
=
07123456789
#
Deletes your stored mobile number.
If the code is accepted the unit will reply “WHL number stored” If the code is accepted the unit
will reply “WHL number deleted”
Please wait for the unit to respond before continuing.
To reset all numbers you can text the code
#
RESET
=
WHL
#
This will delete all primary and divert numbers plus your dial to open (whl) numbers.
NOTE
- It will not affect keypad codes.
www.gsm-activate.co.uk
- 01273462380 - [email protected]
Page 7
