Using Intercom Call Button Entry
Once the numbers have been programmed for the intercom, the call button will be ready to be
used. Visitors will press the call button on the intercom. This will then call the stored primary
phone number for 30 seconds.
Acknowledging the call (5 on Phone keypad)
When answering a call from the intercom, you must press the number 5 keypad button on your
phone. This prevents the call continuing and being sent to the divert number. The call will now
only end when you hang the phone up.
Once you have acknowledged the call and are speaking to the visitor, you can press the
following keys on your phone keypad for different actions to open the gates / doors.
#
(
hash
) Key
Activates relay 1 to open the gate
*
(
star
) Key
Activates relay 2 to open the pedestrian or door lock
Phone Keypad Number 3
Locks on relay 1 to hold the gate open.
Phone Keypad Number 5
Acknowledges the call as above
If the gate has been held open, you can release it by calling the simcard number or enter your
4 digit code on your intercom keypad. This will close the gate.
Primary & Divert Numbers/Using Voicemail.
The intercom will call the primary number for 30 seconds. If it is not answered it will divert
to the divert number and again ring for 30 seconds.
Please acknowledge the call by pressing 5 to stop the call being sent to the divert number.
If the unit hits voicemail it will not be acknowledged and move to the divert number after
30 seconds.
www.gsm-activate.co.uk
- 01273462380 - [email protected]
Page 6
