Page 5
How to program the SMS text message
You can now change the alarm message from
“input detected”
to one of your choice.
To change the message send the text command as follows
#
MESS
=
YOUR MESSAGE
#
The detector will reply with the text message - “MESSAGE STORED”
PLEASE NOTE
You can only use a maximum of 19 characters including spaces for your customised
message.
Telephone Call Alerts
The Wireless Beam Alarm can be programmed to send you a call after each text alarm has
been sent.
You will receive approximately three ring tones. The unit will then hang up. This is to avoid
any call charges being incurred.
To set the alerts to ON please send the text message
#
CALL
=
OFF
#
The unit will reply back with “CALL ON”
To disarm the alerts please send the text message
#
CALL
=
OFF
#
If the call function has been set to ON you will receive a text message and shortly after a
phone call.
