g-lites DM-0356VCD, User Manual

Page: 2 / 11

2
1. Unpacking
Thank you for choosing G-Lites Quad Wash 360. For your own safety, please read this manual
before installing the device. This manual covers the important information on installation and
applications. Please install and operate the fixture with following instructions. Meanwhile,
please keep this manual well for future needs.
G-Lites Quad Wash 360 LED Wash Moving Head is made of a new type of high temperature
strength of engineering plastics and cast aluminum casing with nice outlook. The fixture is
designed and manufactured strictly following CE standards, complying with international
standard DMX512 protocol. It’s available independently controlled and linkable with each
other for operation. And it is applicable for large-scale live performances, theater, studio,
nightclubs and discos.
G-Lites Quad Wash 360 LED Wash Moving Head adopts 36PCS CREE 10W 4-in-1 LED lamps
which features high brightness and stability.
Please carefully unpack it when you receive the fixture and check whether it is damaged during
the transportation. And please check whether the following items are included inside the box:
•
Moving head --------one signal cable (1)
•
Omega clamp --------one user manual (1)
•
Power cable --------one safety chain (1)
2. Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
If the device has been exposed to temperature changes due to environmental changes, do not
switch it on immediately. The arising condensation could damage the device. Leave the device
switched off until it has reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the
case, replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only
handle the power cord by the plug. Never pull out the plug by tugging the power cord.