background image

 

www.g-lites.com 

1. GENERAL INFORMATION 

 

INTRODUCTION:

  Congratulations, you have just purchased one of the most 

innovative and reliable LED fixtures on the market today. Our company has been 
designed to perform reliably for years when the guidelines in this booklet are 
followed. Please read and understand the instructions in this manual carefully 
and thoroughly before attempting to operate this unit. These instructions contain 
important information regarding safety during use and maintenance. 

 

UNPACKING:

 Thank you for purchasing our company products. Every product 

has been thoroughly tested and has been shipped in perfect operating condition. 
Carefully check the shipping carton for damage that may have occurred during 
shipping. If the carton appears to be damaged, carefully inspect your fixture for 
damage and be sure all accessories necessary to operate the fixture have arrived 
intact. In the event damage has been found or parts are missing, please contact 
our customer support team for further instructions. Inside the box you should find: 
the fixture, a DMX XLR cable, a power cable, and this user manual.   
Please do not discard the shipping carton in the trash. Please recycle whenever 
possible. 

 

2. SAFETY INSTRUCTIONS 

Notice:

 As part of our ongoing commitment to continuous 

products update, company will keep the right to 
improve this products, the information in this menu 
may be changed in the future, the company reserve the 
right to change the data without any advises. 

Summary of Contents for ARCH 56


















Reviews: