g-lites 1200SZ, User Manual

Page: 13 / 24

www.g-lites.com 13
FIRST FIXTURE’S IP CODE VALUE = (VALUE OF THE FORMER IP CODE) +
(CHANNEL ON THE CONTROLLER)
Note: The first moving head’s starting IP code is 001.
Channel number on the controller should not be less than the channel number on
the moving head.
6. MOVING HEAD IP FUNCTION SELECTION
There are 16 IP function selections on the G-Lites Moving heads. These
functions could be selected by the operation panel.
7. DISPLAY MENU MAP:
N Description Default Up/Down key
letter
1 DMX setting address setting d.001 d.512
2 PAN normal/anticlockwise 180 degree
setting Pa.rI PA.LE
3 TILT normal/anticlockwise setting TI.Dn TI.Up
4 Extend/compress channel setting 16 bit 8 bit
5
PAN/TILT run speed setting total 1-10
level SPd 6 SPd 1/10
6
Lamp on/controller turn on setting LAP y LAP n
7 Display normal/inversion mode dIP.P dIP.A
8
Fixture working hours H000
9 Key-press restoration enactment rESt
10
Interior electronic restoration
enactment
rST.I rST.I
11
Spare F1-N F1-Y
12 Self-test F2-N F2-Y
13
Master/slave mode F3-N F3-Y
14 Restore default setting of leave the
factory ------- -------
15 Dimmer function dn-r dn-n
16
Temperature contrast T.Nar T Hot / T.Col