G-Lab MGC-6, User Manual

Page: 12 / 24

10
CC Controller’s number programming
Controller’s No sent to the MIDI device is the same for all of the presets. The available range is from 0 to 127.
MIDI OUTPUT mode programming
MIDI OUTPUT of the controller can be switched on so-called Soft Thru mode. In this mode controller
rewrite in unchanged state data from MIDI INPUT to MIDI OUTPUT. In the Soft Thru mode controller
doesn’t send any Program Change and Control Change commands defined in the presets.
Bulk memory dump
System Exclusive dump memory function enables to make controller’s memory backup. Sending and
receiving System Exclusive dump memory message enables editing the presets and setups on the
computer.
Sending the System Exclusive dump memory message is only possible in out mode of the MIDI OUTPUT.
For more details see “System Exclusive dump memory message specification” chapter.
Memory dump permission
Receiving by controller the System Exclusive dump memory message is possible by setting the controller
on the appropriate mode only. It is signalised by blinking rdP text.
Clearing the presets’ memory
In order to clear the presets’ memory it is needed to enter the password by using the numeric keyboard.
The password is 106 . Clearing range can be limited by memory protection function.