G.I.KRAFT GI12117, User Manual, Page: 16 / 19

D 、 Carbon rod Heating
3 、 Operation
Page.14
Set correct time
Remark:
1 、 Setting amperage too high or time too long can cause workpiece surface vehicle body)damage .
Please weld other workpieces for practice before actual operations.
2 、 Setting correct amperage and time according to the workpiece thickness.
3 、 Continuing another operation is applicable after these procedures finished .If not, please
shut off the main power supply and switch off the unit..
Select welding function
Connect negative outside wire
to a clean,paint-free location
on metal workpiece,as close to
welding area as possible.
Connect carbon rod and
carbon rod adaptor with
welding gun.
Turn carbon rod clockwise to heat
up the entire convexity surface.
Cool the surface with a wet
rag or compressed air.
(Position A is recommend).
Set correct power