USE AND INSTALLATION MANUAL
edition: 1/05.10.2020
Page
6
of
10
9.
INSTALLATION OF TRIPOD
Tripod TM9-N can be installed by one person.
a)
Place the tripod vertically in the lowest position on a
level, stable and hard surface. The legs should be
turned outside to their maximum.
Make sure that feet are placed on a hard surface
and can bear the load. The tripod should be placed
above opening so that work rope is approximately in
the middle of the opening.
b)
Pull out tripod legs to a desired length and lock them
using locking split pins. Adjust length of legs so the
head is located horizontally. Legs must be of the
same length at all times.
c)
Correct securing of the leg with split pin.
