![background image](http://html1.mh-extra.com/html/g-fitness/air-rower/air-rower_user-manual_3072083019.webp)
OPERATIONAL INSTRUCTIONS
19
LOAD ADJUSTMENT
There is a
DAMPER(42)
built into the
RIGHT FAN CAGE(43).
Move the Indicator in the
DAMPER(42)
to point to the numbers on
the
RIGHT FAN CAGE(43)
to adjust the load. There are settings
from 1 to 9. Setting #1 will provide the lowest resistance. Setting
#9 will provide the highest resistance.
Indicator
Damper(42)
HANDLEBAR POSITION
The
HANDLEBAR(3)
can be placed on the hook in the
COMPUTER POST(6),
refer to illustration A. Or,
you can place the
HANDLEBAR(3)
on the
HANDLEBAR HOLDER(52)
as shown in illustration B.
A.
PEDAL CAP ADJUSTMENT
The position of the
PEDAL CAPS(45)
can be adjusted. Refer to
the illustration. Pull the
PEDAL CAP(45)
out from the two bulges
in the
PEDAL SUPPORT(5),
then lower or raise the
PEDAL
CAPS(45)
to the desired position. Lock the
PEDAL CAPS(45)
in
position by pressing the adjustment holes of the desired position
onto the two bulges.
Refer to the numbers on the
PEDAL CAPS(45)
to make sure that
PEDAL CAPS(45)
are adjusted on the same position on both
sides.
B.
Bulges