G.B.C TC 73, Instruction Manual

Page: 5 / 24

5
TC 73
Original Instructions
-
rev.01
-
2016 —in compliance with 1.7.4 Machine Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43 – 25046 Cazzago San Martino (Bs) – Italia – Tel. + 39 030 7451154 – Fax. + 39 030 73 56 629
The machine shown in the
drawing is intended to be
used for prepping pipes for
the welding.
It operates while locked in
the OD of the pipe.
The bevel is obtained by
bevelling tools of various
shape and materials, de-
pending by the nature of
the material to be bevelled.
THE MACHINE SHOULD BE OPERATED ONLY BY SPECIALIZED OPERATORS WHO HAVE
BEEN DULY TRAINED ON THE UNIT.
FOLLOWING TO A SPECIFIC FORMATION WE DO NOT ENVISAGE ANY REASONABLY
PREDICTALBE MISUSE OF THE UNIT