62
MINI K
Original Instructions—rev.2011—
In compliance with the step 1.7.4 of the Machinery
Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43 –
25046
Cazzago San Martino (Bs) –
Italia –
Tel. + 39 030 7451154 –
Fax. + 39 030 73 56 629
It is advisable to perform a service c/o G.B.C. Industrial Tools S.p.A. premises
every 400 hours working cycles.
•
Verify the general conditions of the machine;
•
Always use the lubricator when using pneumatic machines
•
Ensure the lubricator is mounted the nearest possible to the machine and
that the lubricant contained is supplied by G.B.C. In
-
dustrial Tools S.p.A. only.
•
Perform a compressed air periodical cleaning on the threaded part of the guid-
ing shaft and in the rear part of the machine.
•
Always ensure that the seats of the tools on the chuck are clean
•
Every 20 –
30
hours ensure the security valve has no air leaks
•
Ensure no air leaks are present on the air supply system nearby the connection
between the machine and the hose.
•
Introduce some drops of gasoline or similar oily solvent in the air intake nipple
of the pneumatic motor and start the machine in idle.
•
Always use well sharpened tools to obtain the maximum result.
G.B.C. Industrial Tools is at your disposal for any information you may re
-
quire
about the above mentioned procedures and for any general clarification you may
need.
