20
CHALLENGE 12
Original Instructions
—
rev.2011
—
in compliance with the paragraph 1.7.4 of the Machinery
Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Artigiani,17
–
25030 Torbiato di Adro (Bs)
–
Italia
–
Tel. + 39 030 7451154
–
Fax. + 39 030 73 56 629
Move the selector “A” on the position “1” or “2”. Press the button “B” and verify the direction of
rotation of the milling tool.
Should the direction be counter-clockwise you will need to rotate the selector on the correct position.
Turn off the machine with the emergency red button.
WARNING!
BE VERY CAREFUL WHERE YOU HOLD YOUR HANDS.
NO!
YES !
Now place the plate in correspondence of the milling tool and push it into the machine.
