FYTTER RU09BNG, Manual

Page: 49 / 50

FYTTER |WWW.FYTTER.COM PAG- 48
ERROR
CODE
POSSIBLE CAUSES CORRECTION
E1 Defection on speed sensor.
Check whether the speed sensor is installed well,
whether the sensor is broken, and whether the
distance between sensor and roller is in 3-5MM.
E2 Overload or over voltage protected. Switch off the power and switch on the power again.
E3 Over current protected Switch off the power and switch on the power again.
E4 Defection on motor
1. Check cable connection between motor and
controller.
2. Check whether the motor is broken.
E6
Defection on the cables between
computer and controller
Check whether the upright cables are well-connected;
E7 Safety key off Attached the safety key correctly.
E0P
Error on controller proofreading with
motor.
Contact your dealers to solve the problem