Fytech POS790, User Manual, Page: 14 / 53

7
System Assembly
3.
Turn to the rear side of the system. 1.
Unscrew the screw (x1) securing 2.
the HDD door and the rear cover
of the system.
Disconnect the SATA cable from 3.
the drive.
HDD replacement for fan system
3-1.
HDD replacement for fanless system
3-2.
To remove and replace the HDD, please follow below steps. The procedures may
be different depending on the fan or fanless system being installed.
Turn to the rear side of the system 1.
and unfasten the screws (x17) to
separate the rear cover from the
system. The HDD is installed on the
motherboard. If your system install
with a stand or a wall mount bracket,
please remove them beforehand.
(Refer to Chapter 4-3 or 4-4)
Disconnect the HDD cable and 2.
replace the HDD.