-28-
Clock:
After inserting the batteries, the clock starts synchronizing with
the DCF-77 time signal. The DCF-77 reception icon starts
flashing to indicate that the DCF-77 signal is being received.
flashing
flashing
flashing
on
off
busy receiving
the DCF-77 sig-
nal (no signal)
busy receiving
the DCF-77 sig-
nal (bad signal)
busy receiving
the DCF-77
signal (good
signal)
DCF-77 signal
reception
successful
no DCF-77 signal
received
The clock automatically starts synchronizing with the DCF-77
signal at 2am and 3am. If this fails, the clock will try again at
4am, 5 am and /or 6am.
You may also manually synchronize the clock by pressing and
holding the button for 3 seconds. The reception icon starts
flashing.
The synchronizing process will take several minutes.
The other buttons won’t function while synchronizing.
During summer time the
DST
icon appears. DST stands for
Daylight Saving Time.
To manually set the time:
If it’s not possible to receive the DCF-77-signal, you may set
the clock time manually. During the manual setup, several other
functions may be set.
Press and hold the “MODE” button for 3 seconds until the hours
of the clock starts flashing. Use the “+” and “-” buttons to set
the values. Press the “MODE” button to confirm each step.
