14
9.
PROBLEMS AND POSSIBLE SOLUTIONS
Headset doesn’t work / no sound:
• The base isn’t switched on. Check whether the adaptor is
connected and inserted into the wall socket.
• The headset isn’t switched on or the battery is empty.
Switch on the headset by sliding the switch to ON. If the
LED still doesn’t illuminate, then the battery is exhausted.
Please charge it immediately.
• When the headset was set to ON when you took the head-
set from the base, you must first slide the switch to OFF and
then back to ON to enable the headset.
• The source that must provide the audio (TV, radio) isn’t
switched on or its volume is set to zero. Switch on the audio
source or increase the volume somewhat.
• The volume of the headset is set to zero. Use the volume
control of the headset to increase the volume.
• You’re out of range from the base. Decrease the distance.
• The headset is paired with the phone and not with the TV or
radio. If necessary, refer to the end of paragraph 6.2 for how
to re-register the headset on the base.
The switch of the headset is set to ON, but the POWER
indicator is not illuminated:
• The headset was just taken from the base. Briefly slide the
switch of the headset to OFF and back to ON to enable the
headset again.
Only one side can be heard:
• The balance control of the headset is turned fully to one
side. Turn this control to the centre position to set both ear
speakers to the same volume.
Summary of Contents for FH-76
Page 1: ...USER S MANUAL FH 76...
