Beam Mantel
Installation Instructions
fypon.com
7
Step 7A -
Apply PL Premium or adhesive to the top and bottom of the wood mounting blocks
or along the top and bottom of the 2x4 or 2x6 where the Beam will be attached. (Fig. 10)
Step 8A -
Apply PL Premium or adhesive to the sides of the Beam Mantel (Fig. 11 and 12). Press the
Beam Mantel to the wall over the mounting blocks or 2x4 or 2x6. Insert 1-1/2" trim screws through
Beam Mantel into wood mounting block or 2x4 or 2x6 approximately 1" from the wall (Fig. 13 and
14). Ensure trim screws are installed vertically without an angle for maximum hold. Countersink
screw about 1/8" and apply filler. Touch up with paint or stain.
Fig. 10
Fig. 11
Fig. 12
Fig. 13
