Fyne Audio FA301iC, Information Manual, Page: 4 / 12

4
1 INTRODUCTION
Thank you for choosing Fyne Audio loudspeakers, proudly designed by our experienced engineers and manufactured to
exacting standards. We believe they will give you many years of listening pleasure.
2 SAFETY
For safety reasons, and to ensure you achieve the best performance possible, please fully read this
document before installing these loudspeakers.
Building Regulations will most likely require a fire hood is installed behind the loudspeaker. It is the duty of
the installer to comply with local regulations and fit a suitably approved design from a third party
manufacturer. Fyne Audio will not be held responsible in any manner for the consequences of not doing so
and for any consequential loss.
These speakers must always be connected to a suitable amplifier and NEVER to a mains supply.
Ensure there are no water, gas pipes or cables behind the ceiling or wall where you are installing the
loudspeaker. If in doubt, consult a qualified tradesman. Ensure any steps are secure and be aware of trailing
wires.
3 UNPACKING
Check the carton contents according to model:
• FA301iC - 1 x 6” Coaxial loudspeaker, 1 x round grille, 1 x mounting template
• FA302iC - 1 x 8” Coaxial loudspeaker, 1 x round grille, 1 x mounting template
•
FA501iC
- 1 x 6” IsoFlare™ loudspeaker, 1 x round grille, 1 x square grille, 1 x mounting template
• FA502iC - 1 x 8” IsoFlare™ loudspeaker, 1 x round grille, 1 x square grille, 1 x mounting template
•
FA502iC LCR
- 1 x 8” IsoFlare™ loudspeaker, 1 x round grille, 1 x mounting template
NOTE:
Optional square grilles can be supplied for the FA301iC & FA302iC models (please contact your Fyne Audio
distributor).