Operation
:
During the charging process, the charger will automatically adjust the charging voltage
and current to carry out the proper charging curve to the battery.
Below is an operation procedure for setting the mode by hand:
Charging Mode:
2.Set battery type to GEL,AGM or WET.
3. Set battery type to either WET or EFB
4. Select Work mode to Charging Mode
1.
Battery voltage automatically
set to either 12V
Set by hand is also available.
Select other Work Modes:
Programming
Mode
Showroom Mode
Replacement Mode
Using Up and Down
Interface
buttons to adjust
voltage for programming
from 12- 14.8V
