DCAM Dynamics processors
15
© 2012 FXpansion Audio
Levels section
Pass-Thru
The
Pass-Thru
control adjusts the level of the Pass-Thru signal, as defined by the
Pass-Thru
switch in the X-Over section.
Process
The
Process
control adjusts the level of the Process
signal, as defined by the
Process
switch in the X-Over
section.
Phase invert
Activating the
Phase invert
button for the Pass-Thru or
Process signals flips the phase of the signal.
.
Saturate
Both the Pass-Thru and Process signals feature individual saturation circuits, activated by the
Saturate
buttons.
The saturation behaviour is dependent on the level of the input signal. Note that this function is not
a peak clipper - the signal can still exceed 0dB depending on the input level and compression
settings.
Listen section
Listen switch
The
Listen
switch selects which signal is monitored from the plugin output. It is useful for
confirming the state of each signal when setting up the CrossComp's parameters.
In
The input signal is monitored, prior to any processing.
Low
The Low band is monitored, prior to any additional processing.
High
The High band is monitored, prior to any additional processing.
Side
The signal used for the compressor's detection circuit is monitored.
Pass
The Pass-Thru signal is monitored, prior to any additional
processing..
Proc
The Process signal is monitored, prior to any additional processing.
Out
The output signal after all processing blocks is monitored. This is the
default setting.
Master section
In Gain
The
In Gain
control adjusts the level of the input signal, from -inf dB to +6 dB.
Out Gain & meter
The
Out Gain
control adjusts the level of the final output signal, from -inf dB to +6 dB. The meter
to the right of this control displays the output level.
