FXA FXAM1H-ZP5-250-1, Instruction Manual

Page: 16 / 100

16
TRANSPORT
Turn off the power tool before any transport and
disconnect it from the power supply.
Apply the power tool at least with two people, do not
touch the table extensions.
Protect the power tool from knocks, bumps and
strong vibrations, such as during transport in vehicles.
Secure the power tool against overturning and sliding.
Never use the safety devices for handling or
transporting purposes.
MAINTENANCE
Warning! Prior to any adjustment, maintenance or
service work disconnect the mains power plug.
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible. Wipe
the equipment with a clean cloth or blow it down with
compressed air at low pressure.
We recommend that you clean the equipment
immediately after you use it.
Clean the equipment regularly with a damp cloth and
some soft soap. Do not use cleaning agents or
solvents; these may be aggressive to the plastic parts
in the equipment. Ensure that no water can get into
the interior of the equipment.
In order to extend the service life of the tool, oil the
rotary parts once monthly. Do not oil the motor.
BRUSH INSPECTION
In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important. The carbon brushes should not be
replaced by anyone but a qualified electrician.
STORAGE
Store the device and its accessories in a dark, dry and
frost-proof place that is inaccessible to children. The
optimum storage temperature is between 5 and 30˚C.
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from
dust and moisture.
When the sawblade and key are not in use, they can
be stored as in Fig 23.
Store the operating manual with the electrical tool.
TECHNICAL SPECIFICATION
Voltage 230V - 50Hz
Rated input (S1) 1800W
No load speed 5000min -1
Blade size Ø250 x Ø30mm
No. of teeth 24
Thickness riving knife 2mm
Table size 563 x 583mm
Left extension table size 583 x 165mm
Right extension table size 583 x 165mm
Cutting range 0-45º
Cutting height 0º 85mm
Cutting height 45º 65mm
Suction port Ø35.5mm
Operating height 820mm
Sound Pressure Level L
pA
94 dB(A)
K=3dB(A)
Sound Power Level L
WA
107 dB(A)
K=3dB(A)
Weight 19.35 kg