FXA FXAJD5506, Instruction Manual

Page: 9 / 140

9
Battery operated units do not have to be plugged into
an electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
even when unit is not operating.
Remove the battery pack from the pole saw before
cleaning, servicing, storing, removing material from
the unit, changing accessories such as the bar and
chain, or when not in use.
A battery pack must be recharged only with the
specified charger for the battery pack. A charger that
may be suitable for one type of battery pack may
create a risk of fire when used with another battery
pack. Use battery pack only with charger listed.
POLE HEDGE TRIMMER SPECIFIC SAFETY
INSTRUCTIONS
Keep all parts of the body away from the cutter
blades. A moment of inattention while operating the
product may result in serious personal injury.
Carry the pole hedge trimmer by the handle with
cutter blade stopped. When transporting or storing the
pole hedge trimmer always fit the cutting device
cover. Proper handling of the pole hedge trimmer will
reduce possible personal injury from the cutter blades.
Hold the power tool by insulated gripping surface
only, because the cutter blade may contact hidden
wiring. Cutter Blades contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Clear the work area before each use. Remove all
objects such as cords, lights, wire, or string which can
be thrown or become entangled in the cutting means.
Beware of thrown objects; keep all bystanders,
children, and pets at least 15 m away from work area.
Check constantly for persons or animals behind or
inside any hedge or bush you intend to trim.
Do not operate in poor lighting. The operator requires
a clear view of the work area to identify potential
hazards.
Inspect the machine before each use. Check for loose
fasteners, etc. Make sure all guards, and handles are
properly and securely attached. Replace any
damaged parts before use.
Do not modify the product in any way.
Do not allow children or untrained individuals to use
this unit.
Wear full eye and hearing protection while operating
the product. If working in an area where there is a risk
of falling objects, head protection must be worn.
Wear heavy long trousers, boots, and gloves. Do not
wear loose fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
Secure long hair so it is above shoulder level to
prevent entanglement in moving parts.
Do not use the product when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance and can
result in serious injury.
Before starting the product, make sure the cutting
blades will not come in contact with anything.
Ensure that the product is correctly located in a
designated working position before starting the
product.
While operating the pole hedge trimmer, always hold it
firmly with both hands by the two handles and ensure
that the operating position is safe and secure. The
manufacturer does not recommend the use of steps
or ladders.
Use the harness if it is supplied with your pole hedge
trimmer. It will assist you to support the weight of the
product during use and whilst moving between
trimming positions. Carefully adjust the harness to fit
comfortably.
Identify the quick release mechanism and practice
using it before you start using the product. Its correct
use may prevent serious injury in the case of an
emergency. Never wear additional clothing over the
harness or otherwise restrict access to the quick
release mechanism.
To protect yourself from electrocution, do not operate
within 10 m of overhead electrical lines.
Never use the pole hedge trimmer near fencing, posts,
buildings, or other immovable objects.
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not
place your hand or fingers between blades or in any
position where they could get pinched or cut. Never
touch blade or service unit unless the battery pack is
removed.
Switch off and remove the battery pack before:
adjusting the working position of the cutting device
cleaning or clearing a blockage
leaving the product unattended
checking, maintenance or working on the product.
Do not force the pole hedge trimmer through heavy
shrubbery. This can cause the blades to bind and
slow down. If the blades slow down, reduce the pace.
Do not attempt to cut stems or twigs that are larger
than 18 mm thick, or those obviously too large to feed
into the cutting blade. Use a non-powered hand saw
or pruning saw to trim large stems.
Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.