7
FWE
REFRIGERATED "COLD-TEMP" SERIES
FWE
REFRIGERATED "COLD-TEMP" SERIES
QUICK START GUIDE & INFORMATION
TEMPERATURE RECALL
Press to display either “Actual Internal Cabinet” actual
temperature, or desired “Set Point” temperature.
Set Point:
The factory default setting shows the "Set Point"
temperature. A momentary touch of the “Temp Recall” key will display
actual temperature. The display will then automatically return to the
set point temperature.
Actual:
To have temperature read-out display the “Actual”
temperature press and hold the “Temperature Recall” Key for five
(5) seconds. The fourth (4th) digit on the display will flash either “S”
(Set), or “A” (Actual) to indicate which mode is active. To switch back
again, repeat this step holding the “Temperature Recall” key for five
(5) seconds.
COLD-TEMP CONTROL PANEL
Activated red light indicates DEFROST is in progress.
DEFROST CYCLE - “ON DEMAND” DEFROST
Press to Activate DEFROST at any time.
Press to Cancel Defrost in progress (Defrost Override).
Note: A 60 second count down will begin on display
before defrost cycle cancels.
