Drilling template
Hammond 1590BB (top face measurements)
90 x 116 x 27mm (without base)
Recommended drill sizes:
Pots
7mm
Jacks
10mm
Footswitch
12mm
DC Socket
12mm
Toggle
6mm
This template is a rough guide only. You should ensure correct marking of your
enclosure before drilling. You use this template at your own risk.
Pedal Parts Ltd can accept no responsibility for incorrect drilling of enclosures.
PedalParts.co.uk
It’s a good idea to drill the holes for the board-
mounted parts 1mm larger to give yourself some
wiggle room unless you’re a drill ninja.
22mm
60mm
33mm
23.5mm
6mm