ASSEMBLING YOUR SPEED-O-METER
(CONTINUED)
3
4a
5a
5b
5c
4b
4c
4d
7
8
Next, connect the wires that drive the speedometer by connecting both electrical connectors. The connectors
will only fi t in one position do not force them as this might damage the connector tips. Make certain that the
clips are locked in place by lightly pulling on each end. This will keep the connectors from coming loose and will
insure that the speedometer works properly.
Insert the neck tube assembly into the steering tube. Gently push the wires into the
tubes making sure not to pinch the wires. Push the steering tube all the way down
and securely tighten clamp.
Next insert the handle bar
tubes with the black grips
into the speedometer
housing make sure
that the chrome push
buttons line up with the
black buttons on the
speedometer housing.
To activate battery, remove battery non-conductive
plastic by pulling plastic tab this will allow the battery
to be connected.
The Fuzion Speed-O-Meter scooter comes equipped
with a Speedometer. The magnets in the front wheel
and fork deliver speed and distance data to te
speedometer. To start the speedometer or to reset it
just press the red Mode Button.
owner’s manual
6
Pressing the handlebar
spring button, insert the
handlebar into the riser
tube to desired height;
the handlebar spring
button will lock into one
of the positions on the
riser tube.
