ASSEMBLING YOUR SPEED-O-METER
COMPONENTS & PARTS
SPEED-O-METER COMPONENTS LIST:
Deck assembly with wheel and brake
Front neck, tube and wheel assembly
Steering tube with handle bars
Speedometer
housing
Riser tube quick release clamp
Riser tube lower clamp
Deck
bolts
Allen
wrench
Battery type CR2025 (not shown)
1
2
3
4
5
6
7
8
9
2
FAILURE TO PROPERLY
ASSEMBLE AND
TIGHTEN ALL BOLTS
AND COMPONENTS
MAY CAUSE LOSS OF
SCOOTER CONTROL
AND INCREASE RISK
OF FALLING. MAKE
CERTAIN THAT YOU
FULLY UNDERSTAND
ALL THE ASSEMBLY
AND MAINTANENCE
INSTRUCTIONS. IF
YOU ARE UNCERTAIN,
PLEASE CONTACT
NEXTSPORT
CUSTOMER SERVICE.
Visit our website
www.fuzionscooter.com
for product support, replacement
parts & general help.
Insert neck tube assembly
into the aluminum frame.
Insert fully until the deck
bolts line up with the neck
tube assembly.
Securely tighten all four
bolts (2 on either side).
Make certain that bolts
are tight as they hold the
deck together with the
neck tube assembly. After
tightening the bolts check
for any looseness between
the deck and the neck
tube assembly, it should
feel solid without any play.
owner’s manual
1
2
3
4
5
6
7
8
1
2
3
