Original User Manual FUXTEC FX-MH126_de_en_fr_rev09
24
2.
Difficulties during operation
Situation
Cause
Solution
Engine does not
reach speed
choke is in "COLD START" position,
exhaust system blocked no air supply,
moving elements worn, ignition spark
weak, too much valve clearance, cylinder
head sooty
Open choke, replace exhaust system
Check or replace ignition coil, adjust
flywheel, spark plug
Operating
materials run
out
Lines to carburettor clogged, Spark plug
spacing incorrect
Replace the lines and if necessary the
carburettor; adjust gap dimension
Engine noises
Wrong choke position,
Camshaft damaged
Check/replace camshaft
Carburettor
leaking
Failure of the non-return valve on the tank
cap
Replace the fuel filler cap
Carburettor gasket worn out
Replace carburettor or gasket
If no troubleshooting solves the problem, please contact the customer
support of FUXTEC GmbH directly. Only use original parts approved by FUXTEC,
otherwise there is a risk of danger.
11.
Customer service
Have your purchased equipment repaired only by qualified personnel and only with original spare
parts. This will ensure that the safety of the equipment is maintained.
12.
Warranty
The warranty period is 24 months from date of purchase. Please keep your proof of purchase in a
safe place. Wearing parts and damage caused by improper use, use of force, technical
modifications, use of incorrect accessories or non-original spare parts and repair attempts by non-
qualified personnel are excluded from the warranty. Warranty repairs may only be carried out by
FUXTEC technicians.
