Original User Manual FUXTEC FX-MH126_de_en_fr_rev09
21
System/Component
Procedure
Befor
e use
After
every 25
hours
After
every 50
hours
After
every
100
hours
Note
ENG
INE
Fuel leaks, fuel
splashes
Wipe
X
Replace if
necessary
Fuel tank, air filter,
fuel filter
check/clean
X
X
Replace
carburettor, if
necessary
idling adjustment
screw
Check idle
speed
X
GAP: 0.6 - 0.7 mm
Replace if
necessary
Spark plug
Clean and
readjust
cylinder gap
X
Cylinder fins, air
intake opening
clean
X
muffler, spark extinguisher,
cylinder outlet
clean
X
SHA
FT
throttle valve lever,
ignition switch
Check function
X
cutting parts
replace if
something is
not correct
X
Gearbox housing
Lubricate
X
Screws/nuts/bolts
tighten/replace
X
X
not the adjusting
screws
Maintenance before long-term storage
IMPORTANT!
When draining the fuel, avoid spilling the fuel. Spillage must be removed and the lid of the
container closed tightly.
1. Have the engine run with an empty fuel tank until it stops on its own to remove any
remaining fuel in the engine
2. Remove the spark plugs and pour 1-2cc of two-stroke engine oil into the engine. Pull the
pull starter 2 - 3 times. Then reinstall the spark plugs.
3. Wet metal parts with anti-rust oil and place the protective cover on the cutting edge.
4. Store the device in a place protected from moisture for storage.
