background image

Original User Manual FUXTEC 20V Cordless pole chainsaw FX-E1HE20 

 

 

 
- Wear suitable clothing. Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away 
from moving parts. Loose clothing, jewelry, or long hair can be caught by moving parts. 
 
 

Use and treatment of the power tool 

 
- Do not overload the device. Use the appropriate power tool for your work. With the right power 
tool, you will work better and safer in the specified power range. 
 
- Do not use a power tool with a defective switch. A power tool that can no longer be switched on or 
off is dangerous and must be repaired. 
 
- Unplug the power cord and/or remove the battery before making any adjustments to the device, 
changing accessories, or putting the device away. This precaution prevents unintentional starting of 
the power tool. 
 
- Keep unused power tools out of the reach of children. Do not allow persons to use the device which 
is not familiar with it or have not read 
these instructions. Power tools are dangerous if they are used by inexperienced persons. 
 
- Maintain power tools with care. Check that moving parts function correctly and do not jam, that 
parts are not broken or damaged in such a way that the function 
of the power tool is impaired. Have damaged parts repaired before using the device. Many accidents 
are caused by poorly maintained power tools. 
 
- Keep cutting tools sharp and clean. Carefully maintained cutting tools 
with sharp cutting edges jam less and are easier 
to guide. 
 
- Use power tools, accessories, insertion tools, etc. according to these instructions. Take into account 
the working conditions and the job to be performed. The use of power tools for applications other 
than those intended can 
lead to dangerous situations. 
 
 
 
 
 
 
 

Use and handling of the cordless tool 

 
- Charge the batteries only with chargers recommended by the manufacturer. A charger that is 
suitable for a particular type of battery poses a fire hazard when used with other batteries. 
 
- Only use the batteries provided in the power tools. Using other batteries may result in personal 
injury and fire hazards. 

Summary of Contents for FX-E1HE20




















Reviews: