Original User Manual FX-4MS131_rev03
8
OTHERS TO DANGER. Follow these general safety instructions.
Always wear safety glasses for eye protection. Long hair must be tied back. Do not
wear loose clothing or jewellery that can get caught in moving parts of the machine.
Safe, stable, non-slip safety shoes must always be worn. It is recommended that
legs and feet are covered to protect against fly debris during operation.
Check the entire machine for loose parts over (nut, bolt, screw, etc.). Maintain or
replace them if necessary,
before you use the device. Do not use accessories with this drive head other than
those recommended by our company. Otherwise, severe
injuries to the user or bystanders and
damage to the machine may result.
Keep the handles free of oil and fuel.
Always use the correct handles and shoulder strap when cutting.
Do not smoke when mixing the fuel or filling the tank.
Do not mix fuel in a closed room or near open fires. Ensure sufficient ventilation/air
circulation.
Mix and store the fuel mixture in a marked
container approved for such consumption according to local
regulations.
Never remove the fuel tank cap while the machine is running.
Do not operate the machine in a closed room or building. Exhaust gases contain
dangerous carbon monoxide.
Do not attempt to adjust the machine while running or carrying the device. Always
adjust the machine on a flat, free surface.
Do not use the machine if it is damaged. Never remove the protection of the device.
Otherwise, severe injuries of the operator or spectators, as well as damage to the
device, can result.
Check the area to be cut and remove any debris that may be entangled in the nylon
cutting head or cutting blade. Also, remove any objects that the machine may throw
around while cutting.
Never leave the machine unattended.
Do not reach far forward. Maintain a firm stand and balance at all times. Do not let
the machine run while standing on a rope ladder or any other unstable standing
position.
Children must not have access to the machine. Spectators should be kept
at a safe distance from the work area, at least 15 METERS.
