background image

 

FutureLogic, Inc. 

425 East Colorado Street • Suite 100 

Glendale, CA 91205 USA 

Phone 818.244.4700 • Fax 818.244.4764 

www.futurelogic-inc.com

 •

 [email protected]

 

Operators and Technicians Manual 
PSA-66-ST2 Printer (GEN2™) 

©

 2002 – 2007 FutureLogic, Incorporated. All Rights Reserved.  

TCL Printer Language 

©

 1991 – 2007 FutureLogic, Incorporated. All Rights Reserved. 

TCL Printer Language is a proprietary, copyrighted language developed by 
FutureLogic, Incorporated for exclusive use with its printer products. 
GEN2 Powered by FutureLogic, GEN2, TCL, ITH, TRT, TCL Editor, Download Utility, 
CommWrangler, FutureLogic Exchange, and FutureLogic are either trademarks or registered 
trademarks of FutureLogic, Incorporated in the United States and/or other countries. 

Netplex is a proprietary hardware interface and protocol of International Game Technology 
Corporation. 
Molex is a registered trademark of Molex Incorporated. All product names referenced herein 
are trademarks of Molex, its affiliates, related companies, licensors, and/or joint venture 
partners. 
All other trademarks and products or brand names mentioned herein are the property of their 
respective owners. 
This document contains Proprietary and Confidential information and its contents are covered 
by Non-Disclosure Agreement.  
Technical information in this manual is disclosed for informational purposes only.  
No grant of license or use rights of any such information is made by publication or distribution 
of this manual. 
No part of this guide may be reproduced, stored in a retrieval system, or transmitted, in any 
form or by any means, electronic, mechanical, recording, or otherwise, without the prior 
written permission of FutureLogic, Incorporated. 
These specifications are subject to change without notice and may not completely and correctly 
document the operation of this product. 
12/07/2007 
MNL-000003 
REV.N 
 

 

The GEN2 Netplex printer (PSA-66-ST2N) is in compliance with the Netplex protocol of IGT. 

 

The PSA-66-ST2 printer described in this manual is in compliance with all applied CE 
standards. 

 
This document describes product functions and technology that may not be available in a 
particular gaming jurisdiction, and would therefore not be available for sale and not approved 
for use at this time. Please contact your local sales representative for information concerning 
what features are available in your jurisdiction. 

Summary of Contents for PSA-66-ST2





















































Reviews: