Firmware Download Utility Instructions
©
2004 – 2005 FutureLogic, Incorporated. All Rights Reserved.
PUBN Page 6 of 10 05/04/2005
PUBN-000027 REV.B
The self test ticket contains information similar to the following:
Figure 1-9
Sample Self Test Ticket
Note:
The download process will not complete if any of these steps are not successful.
The result of a failed download process will be a printer with its memory flushed or
otherwise unable to boot successfully. Specifically, the printer will not be capable of
printing. If this occurs, repeat these steps. If not successful, follow your RMA procedure
for this printer.
12.
Remove this printer.
13.
Go back to step 2 and repeat this process until all printers have been loaded.
1.2.1
Version Control and Verification
The firmware version number will be printed on the ticket after the download is complete.
Verify that this matches the firmware version displayed on the screen.
Model:
PSA-66-xxxx
Firmware: STPV2.1.1
TKT-2.3
COMMUNICATION
Interface: Serial
Baud Rate
19,200
Data Bits:
8
Parity:
NONE
Handshaking:
XON/OFF+HARDWARE
PRINT CONTROL:
Darkness Control: +00%
Black Bar Index: Enabled
Print On Demand: Disabled
Auto Sleep Timer:
Off
SYSTEM RESOURCES
Templates: 1,2,3,4,5,6,7,8,9,A,B
Print Regions:
1,2,3,4,5,6,7,8,h,9,A,B
C,D,E,F,G,I,J,K,L,N,O,P
Q,R,S,T,U,Z,X,a,b,c,d,e,
f,g,i,j,k,l,m,n,o,p,q
Graphics:
Fonts:
3(0), 1(0), 2(0), 4(0)
7(0),
8(0),
5(0)
