Futurecom PDR8000, Programming Manual, Page: 59 / 86

Document 8K088X04 R5.01
PDR8000
®
Portable Digital Repeater Programming Guide
2022-08-25 Page 59 of 86
Field Name Options / Units Description Notes
Channel 1-64 Channels Identifies the name of the channel for the
current Analog Code Table
< Prev.CH 1-64 Decrements Channel by 1 Changes the
Analog Code
Table
accordingly.
< Next CH 1-64 Goes to the next channel Changes the
Analog Code
Table
accordingly.
PL/DPL Code
Table Name Maximum 10
alphanumeric
characters Name that identifies the current Analog
Code Table.
< Prev.Tbl 1-64 Decrements Analog Code Table by 1
< Next Tbl 1-64 Goes to the next Analog Code Table
Channels Using
This Table: Comma separated
list of numbers, 1-64 List of PDR8000 channel number(s) that use
current Analog Code Table. This field is read
only.
Multi PL/DPL
Enabled
Disabled
Multi PL/DPL - Multi-coded squelch allows
you to predefine a set of accepted Rx
PL/DPL and associated Tx PL/DPL being
used by repeat calls.
Receiver operation allows PDR8000 to
accept incoming RF signal containing a
specific PL/DPL value as defined by the Rx
PL/DPL field in the first row of Multi-PL/DPL
table. Repeater calls are transmitted using
the Tx PL/DPL field value as defined in first
row of Multi-PL/DPL table.
Receiver operation allows PDR8000 to
accept incoming RF signal containing a
specific PL/DPL value as defined by the Rx
PL/DPL field in all the 14 rows if ‘Enabled’ in
the Multi-PL/DPL table. Repeater calls are
transmitted using the Tx PL/DPL field value
as defined in the Multi-PL/DPL table.