Document 8K088X04 R5.01
Portable Digital Repeater Programming Guide
Page 16 of 86
RF Energy Exposure Compliance, Awareness and
Control Information and Operational Instructions
This radio equipment is intended for use in occupational / controlled conditions, where users
have full knowledge of their exposure and can exercise control over their exposure to meet FCC
limits. This radio device is NOT authorized for general population, consumer or any other use.
ATTENTION!
Changes or separation distances specified in the RF Safety Booklet (available on the
Futurecom website: modifications not expressly approved by Futurecom Systems Group,
ULC. could void the User’s authority to operate the equipment. To satisfy FCC/ISED RF
Exposure requirements for mobile transmitting devices, the minimum
http://www.futurecom.com/support/documentation-software/
) should be maintained to ensure
compliance, operations at closer than this distance is not allowed.
ATTENTION!
Futurecom requires the PDR8000 operator to ensure FCC Requirements for Radio Frequency
Exposure are met. The minimum distance between all possible personnel and the antenna is
Specified in the RF Safety Booklet (available on the Futurecom website:
http://www.futurecom.com/support/documentation-software/). Failure to observe the Maximum
Permissible Exposure (MPE) distance exclusion area around the antenna may expose persons
within this area to RF energy above the FCC exposure limit for bystanders (general population).
It is the responsibility of the PDR8000 operator to ensure MPE limits are observed at all times
during transmissions. The PDR8000 operator must ensure at all times that no person comes
within MPE distance from the antenna.