4-14
Chapter 4
Features of the Icons on the
SecuwayCard 2000
Manager Program
Then the submenu which contains the <LT2P Start> and <L2TP Exit>
command is displayed.
Select < L2TP Start> to display the L2TP box where you can supply the
necessary information for tunneling. To disable tunneling, select <L2TP
Exit>. Then the tunneling information will be deleted and L2TP disable.
Once you create a tunnel, it remains active until you quit the program.
There is no need to create a tunnel or disable tunneling while the program
is running.
If the
SecuwayGate 2000
is restarted when
SecuwayCard
2000
is running, tunneling becomes disabled. To restore tunneling, you
have to create a tunnel again.
In order to configure L2TP at
SecuwayCard 2000
,
SecuwayGate 2000
must be prepared for working with
L2TP.