6-4
Chapter 6
Installing the Booting Restriction Program
[y|n]
: If you set this option as “y” and input the incorrect password
repeatedly up to the times you set this option, the data on the harddisk
drive is removed. If you set this option as “n” and input the incorrect
password repeatedly over the times you set this option, the system is
stopped running without removing the data on the harddisk drive.
Example
A:>
install loader.img 10 y img_0267.dat
[ENTER]
The previous example shows the case that you set the option
[retrialCount] as “10” and “y”. In this case, if you input the incorrect
password over 10 times while booting the system, the data on the
harddisk drive is removed. If you set “n” instead of “y” at this option
and input the incorrect password repeatedly over 10 times, the system
is stopped running without removing the data on the harddisk drive. In
this case, the
SecuwayCard 2000
is initialized at this time and so
you should receive the
SecuwayCard 2000
security key from the
SecuwayCenter 2000
manager again to use it.
img_0267.dat is the name of the master boot image file. If you
do not set it especially, the name is created automatically as the
one related with the serial number of the
SecuwayCard
2000
.
After executing “install loader.img”, the MBR (Master Boot Record)
is created on the floppy disk. This file should be saved safely
because it is used when you execute “uninstall.exe” to remove the
Boot Restriction Program.
