19
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
PS/D-200 Promotion Scan
CAUTION !
Keep this device away from rain and moisture !
Unplug mains lead before opening the housing !
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOU INITIAL START-UP!
Every person involved with the installation, operation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual
CAUTION ! Be careful with your operations.
With a voltage of 230V you can suffer a dangerous electric shock
when touching the wires !
1. Introduction
Thank you for having chosen a FUTURELIGHT PS/D-200. You will see you have acquired a powerful and versatile
device. The PS/D-200 is a scanner combining the advantages of a multi-functional projector and of a professional
promotion scan. This scanner features high-resolution stepper-motors, which provide absolutely smooth mirror
movements.
Unpack your PS/D-200.
Before you initial start-up, please make sure that there is no damage caused by transportation. Should there be
any, consult your dealer and do not use the device.
1.1 Safety instructions
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure
a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written
in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Please do never run the device without lamp!
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off until it
has reached room temperature.
During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily
mean that the device is defective.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
1.2 Operating instructions
This device was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
You can install the device at any desired place. Please make sure that the device is not exposed to
extreme heat, moisture or dust. There should not be any cables lying around. You endanger your own and the
safety of others!
Operate the device only after having familiarized with its functions. Do not allow an operation by persons who do
All manuals and user guides at all-guides.com
