Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
1,650 W
DMX-control-channels: 25
DMX-512-connection:
5-pin and 3-pin XLR
Flash-rate: 13
Hz
Colour-system: CMY
colour-mixture
Colour-wheel:
4 colours, 4 gobos, CTB and white
Colour temperature:
2900 K - 6000 K
Rotating gobo-wheel 1:
5 gobos and open
Rotating gobo-wheel 2:
5 gobos and open
Outside diameter of the gobos:
37.4 mm
Image diameter of the gobos:
31 mm
Maximum PAN-movement 540°:
in 3.5 s
Maximum TILT-movement 265°:
in 2.5 s
Length of base (including handles):
600 mm
Width of yoke:
530 mm
Height (head horizontal):
630 mm
Weight (net):
63 kg
Maximum ambient temperature t
a
:
45° C
Maximum housing temperature t
B
(steady state): 100° C
Min.distance from flammable surfaces:
0.5 m
Min.distance to lighted object:
0.5 m
Fuse:
F 15 A, 250 V
Accessory:
PHILIPS MSR 1200SA 5600K GY-22 750h
No. 89109016
FUTURELIGHT CP-256/64 controller 16bit
No. 51834288
FUTURELIGHT CP-512/64 controller 16bit
No. 51834295
Wizard-512 USB DMX-So Interface
No. 51860102
Wizard-1024 USB DMX-So Interface
No. 51860110
FUTURELIGHT ISP Upload Set
No. 51836901
Flightcase for 1x PHS-1200 incl.reelboard
No. 51836869
FUTURELIGHT DES-3 DMX-terminator 3-pin
No. 51834001
Please note: Every information is subject to change without prior notice. 14.12.2005 ©
51838375_V_1_2.DOC
56/110
