00035849.DOC, Version 1.0
29/31
160 191
A0 BF
63% 75%
S Open
192 223 C0 DF
75% 87%
F Random strobe-effect with increasing speed
224 255
E0 FF
88% 100%
S Open
Control-channel - Dimmer intensity
Only available, if control channel Internal Programs is not active.
Decimal Hexad. Percentage S/F
Feature
0 255
00 FF
0% 100%
F Gradual adjustment of the dimmer intensity from 0 to 100 %
Control-channel – Speed
Only available, if control channel Internal Programs is active.
Decimal Hexad. Percentage S/F
Feature
0 255
0 FF
0% 100%
F Speed adjustment min to max
DMX-512 connection / connection between fixtures
The wires must not come into contact with each other, otherwise
the fixtures will not work at all, or will not work properly.
Please note, the starting address depends upon which controller is being used.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with
the fixture or one fixture with another.
Occupation of the XLR-connection:
If you are using controllers with this occupation, you can connect the DMX-output of the controller directly
with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other
XLR-outputs, you need to use adapter-cables.
