00035849.DOC, Version 1.0
23/31
but instead use a professional structural rigger.
Improper installation can result in bodily injury and or
damage to property.
The device has to be installed out of the reach of
people.
If the device shall be lowered from the ceiling or high
joists, professional trussing systems have to be used.
The device must never be fixed swinging freely in the
room.
Caution:
Devices in hanging installations may cause
severe injuries when crashing down! If you have
doubts concerning the safety of a possible
installation, do NOT install the device!
Before rigging make sure that the installation area
can hold a minimum point load of 10 times the
device's weight.
DANGER OF FIRE!
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Mount the device to your trussing system using an appropriate clamp.
For overhead use, always install an appropriate safety bond.
You must only use safety bonds
complying with DIN 56927, quick
links complying with DIN 56926,
shackles complying with DIN EN
1677-1 and BGV C1 carbines. The
safety bonds, quick links, shackles
and the carbines must be sufficiently
dimensioned and used correctly in
accordance with the latest industrial safety regulations (e. g. BGV C1, BGI 810-3).
Please note:
for overhead rigging in public or industrial areas, a series of safety instructions have to be
followed that this manual can only give in part. The operator must therefore inform himself on the current
safety instructions and consider them.
The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions!
Pull the safety bond through the attachment eyelet and over the trussing system or a safe fixation spot.
Insert the end in the quick link and tighten the safety screw.
The maximum drop distance must never exceed 20 cm.
A safety bond which already held the strain of a crash or which is defective must not be used again.
Adjust the desired inclination-angle via the mounting-bracket and tighten the fixation screws.
DANGER TO LIFE!
Before taking into operation for the first time, the installation has to be approved by an expert!
