00070537.DOC, Version 1.0
31/35
- Key lock
With this function, you can activate the automatic keylock status. If this function is activated, the keys
are automatically locked 15 seconds after the last input. In order to deactivate the keylock status,
press the Mode/Esc-button for 3 seconds.
• Select
"LOCK"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
- Main menu 1
• Press
[ENTER]
to enter the main menu (display flashing).
• Press
[UP]
or
[DN]
to select
“SET”
.
- Status if no DMX-signal
With this function, you can select the status for the case that there is no DMX-signal. You can choose
between „OFF“ for Blackout, „HOLD“ for holding the last position and „AUTO“ for running the internal
program.
• Select
“AUTO”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
.
• Press
[UP]
or
[DN]
to select between
"OFF"
,
"HOLD"
and
"AUTO"
.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
- Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the
default values (shaded). Any edited scenes will be lost.
• Select
“LODA”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
- Power on with manual settings
With this function the device directly accesses the adjusted values under “MANL” when the power is
turned on.
• Select
“POHO”
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.
- Adjust ventilation fan
With this function, you can adjust the ventilation fan.
• Select
"FANS"
by pressing
[UP]
or
[DN]
.
• Press
[ENTER]
to confirm; the display shows
“AUTO”
.
• Press
[UP]
to select
“HIGH”, “LOW”
or
“AUTO”
.
• Press
[ENTER]
to confirm.
• Press
[MODE/ESC]
in order to return to the main menu.