background image

4

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOU INITIAL START - UP!

Introduction

Thank you for having chosen a FUTURELIGHT MH-460. You acquired a versatile, powerful and intelligent
lighting-effect.
Unpack your FUTURELIGHT MH-460 and make sure that there are no damages caused by transportation.
Should there be any, please consult your local dealer and do not take the device into operation.

Features

Moving-head spot
Cam Lock system with 2 Omega holders included in the delivery • Versatile operation modes via DMX-512,
as stand alone or in Master/Slave-mode (up to 9 slaves) • Three freely programmable programs by which all
slaves can be controlled via the master-device • Quick Lock system for easy opening of the projector head •
Easy lamp-exchange via service screws • Optimized optical system for highest light output • Rotating gobo-
wheel with 7 interchangeable and indexable rotating gobos plus open. Rotating gobos: 4 metal gobos, 1
multicolor dichroic gobo, 1 glass gobo. Rotating gobo-wheel continuous rotation • The rotating gobos can be
turned by 360°, the adjusted position is memorized • Colour-wheel with 11 dichroic filters plus white. •
Rainbow-effect in both directions • Shutter/dimmer unit allowing very smooth dimming and strobo effect 1-8
flash per sec. • Modular construction of fixture • Addressing, special functions setting, effects calibration via
control panel with 4-digit LED display • Readout fixture and lamp usage, receiving DMX values, temperature,
etc • Built-in analyzer for easy fault finding, error messages • Built-in demo sequences • Remotely
controllable speed of Pan/Tilt movement for easy programming • Remote reset function • Intelligent control
panel with 4-digit LED display • 4 DMX-channels • Exact positioning within 530° Pan and 285° • Tilt
Automatic Pan/Tilt position correction • High luminous-efficiency parabolic mirror and double condenser
system • 19° standard objective • All lenses are anti-reflection coated • 6 high-quality stepper-motors for
smooth movements • Self-resetable thermo-fuse • For CDM-SA/T 150/942, G-12 socket lamp • DMX-control
via every standard DMX-controller • Suitable FUTURELIGHT controllers: CP-256 Controller, EX-4 Controller,
CP-528 Controller

Summary of Contents for MH-460


















Reviews: