12
The Moving-Head can be placed directly on the
stage floor or rigged in any orientation on a truss
without altering its operation characteristics (see
the drawing).
The fixture’s base enables to be mounted in two
ways: via the Omega-holders or via the adapter
plate. Use the clamps with screws M12.
For overhead use, always install a safety-rope
that can hold at least 12 times the weight of the
fixture. You must only use safety-ropes with
screw-on carabines.
Installation via the Omega holders
(1) Clamp
(2) Safefty rope
(3) Quick-lock fastener
(4) Omega-holders
Screw one clamp each via a M12 screw and nut onto the Omega holders.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the bottom of the
device. Tighten the quick-lock fasteners fully clockwise. Install the second Omega holder.
Pull the safety-rope through the holes on the bottom of the base and over the trussing system or a safe
fixation spot. Insert the end in the carabine and tighten the safety screw.