00073815.DOC, Version 1.1
40/47
Set
Users
User Mode
Standard
Extended 1
Extended 2
User
User’s mode to
change channel
numbers
Edit User
Max Channel = XX
PAN = CH01 ...
Preset User modes
Calibration
--Password--
Color ...
Password=XXX
Color =XXX ...
Wheel adjustment
to standard position
password „050“
Fixture ID
Name
--Password--
PID Code
Name
password „050
Set PID Code of RDM
Wireless Set
DMX on cable
Reset Connect
ON/OFF
ON/OFF
Loopthrough data
Logout from sender
Reload Default
Basic Reload
Program Reload
--Password--
Private Reload
All Reload
ON/OFF
ON/OFF
XXX
ON/OFF
ON/OFF
Basic Reload
Program Reload
password „050“
Private Reload
All Reload
Progra
m
Play
DMX receive
Back to DMX mode
Slave receive
Slave 1, Slave 2,
Slave 3
Slave setting
Sequence Master/Alone
Auto program
Music Master/Alone
Music control
Select Chase
Chase Part 1
Chase Part 2
Chase Part 3
Chase 1- 8 Chase 1
Chase 1- 8 Chase 2
Chase 1- 8 Chase 3
Select programs to be
run
Edit Chase
Chase 1
:
Chase 8
Chase Test
Step 01 = SCXXX
Step 64 = SCXXX
Testing program
Program in loop
Save and exit
Edit Scenes
Edit scene 001
:
Edit scene 250
Pan,Tilt, ...
-- Fade Time --
-- Scene Time --
DMX Input
Save and
automatically return
manual scenes edit
Scenes Record
ScXX=>ScXX
Automat. scenes rec
Connect
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select
“DMX Address“
by pressing Up or Down.
• Press the Enter-button, adjust the DMX address by pressing Up or Down.
• Press the Enter-button to confirm.
Wireless
From factory, this projector is prepared for wireless data transmission (W-DMX).
With the function”Wireless” you can log in the wireless receiver in to a wireless transmitter, the fixture could
now receive the wireless DMX signal.
• Select
“Wireless“
by pressing Up or Down.
• Press the Enter-button to confirm.
If a device with wireless receiver is connected with a DMX-controller via cable, the device will be controlled
by the cabled controller and not by the wireless transmitter.
