00114547.DOCX, Version 1.0
41/56
Note:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If there is
no data received at the DMX-input, the display will flash.
This situation can occur if:
- the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
The LEDs of the device are arranged in the following order (see graphic)
and can be individually controlled with the following DMX-protocol.
DMX protocol
Mode/Channels
Value
Feature
St.
Ex.
1
Ex.
2
Ba.
1
8bit
Ba. 2
16bit
19
Ch.
41
Ch.
170
Ch.
18
Ch.
20
Ch.
1
1
1
1
1
Horizontal movement (PAN)
0
255
Push slider up in order to move the head horizontally (PAN).
Gradual head adjustment from one end of the slider to the
other (0-255, 128-center). The head can be stopped at any
position you wish.
2
2
2
PAN-movement with 16-bit resolution
0
255 Fine indexing
2
3
3
2
3
Vertical movement (TILT)
0
255
Push slider up in order to move the head vertically (TILT).
Gradual head adjustment from one end of the slider to the
other (0-255, 128-center). The head can be stopped at any
position you wish.
4
4
4
TILT-movement with 16-bit resolution
0
255 Fine indexing
3
5
5
3
5
PAN/TILT speed
0
255 Decreasing speed
6
6
PAN/TILT function
0
15
Normal
16
31
Blackout at PAN/TILT-movement
32
255 No function
4
7
7
Shutter, strobe function
0
15
Normal Shutter Functions
16
31
Opening pulse-effect