00123553.DOCX, Version 1.0
38/52
If several EYE-19 HCL ZOOM are addressed similarly, they will work synchronically.
Press the Up/Down-buttons for setting the desired starting address. Now you can start operating the EYE-19
HCL ZOOM via your lighting controller.
Note:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If there is
no data received at the DMX-input, the display will flash.
This situation can occur if:
- the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
The LEDs of the device are arranged in two different segments (see graphic) and
can be individually controlled with the following DMX-protocol.
DMX protocol
Mode/Channel
Value
Feature
St. Ex.
Ba-
sic
8bit
Ba-
sic
16bit
1
1
1
1
Horizontal movement (PAN)
0
255
Push slider up in order to move the head horizontally (PAN). Gradual
head adjustment from one end of the slider to the other (0-255, 128-
center). The head can be stopped at any position you wish.
2
2
2
PAN-movement with 16-bit resolution
0
255 Fine indexing
3
3
2
3
Vertical movement (TILT)
0
255
Push slider up in order to move the head vertically (TILT). Gradual head
adjustment from one end of the slider to the other (0-255, 128-center).
The head can be stopped at any position you wish.
4
4
4
TILT-movement with 16-bit resolution
0
255 Fine indexing
5
5
3
5
PAN/TILT speed
0
255 Decreasing speed
6
PAN/TILT function
0
15 Normal
16
31 Blackout at PAN/TILT-movement
32 255 No function
6
7
Shutter, strobe function
0
15 Normal Shutter Functions
16
31 Opening pulse-effect
32
47 Closing pulse-effect
2
1