00070918.DOC, Version 1.2
45/48
2. Automatic Program Run
• Select
“Program”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Select
“Sequence”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Press Up or Down to select
“Master”
or
“Alone”
. The selection "Alone" means Stand Alone-mode and
"Master" that the device is defined as master.
• Press the Enter-button to confirm.
3. Program for Select Chase
• Select
“Edit Chase”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Select
“Select Chase”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Press Up or Down to select
“Chase Part 1”
,
“Chase Part 2”
or
“Chase Part 3”
, and thus select which
Slave program is to be sent. Selection „Part 1“ means, that the Slave unit runs the same program as the
master units.
• Press the Enter-button to confirm.
4. Program selection for Edit Program
• Select
“Edit Chase”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Select
“Edit Chase”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Press Up or Down to select the desired program. With this function you can edit specific scenes into a
specific program.
• Press the Enter-button to confirm.
5. Automatic Scene Recording
• Select
“Edit Chase”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Select
“Edit scenes”
by pressing Up or Down.
• Press the Enter-button to confirm.
• Press Up or Down to select the desired scene numbers. You can program a maximum number of 250
scenes.
• Press the Enter-button to confirm.
• Press Up or Down to select the desired value.
• Press the Enter-button to confirm.
Example:
Program 2 includes scenes: 10, 11, 12, 13;
Program 4 includes scenes: 8, 9, 10 and
Program 6 includes scenes: 12, 13, 14, 15, 16
Chase Part 1 is Program 2;
Chase Part 2 is Program 3;
Chase Part 3 is Program 6
The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture: