00139636, Version 1.0
44/56
Control Board
The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or make a reset.
The main menu is accessed by pressing Enter until the display is lit. Browse through the menu by pressing
the arrow buttons (up, down, left, right). Press Enter in order to select the desired menu. You can change the
selection by pressing the arrow buttons. Press Enter in order to confirm. The functions provided are
described in the following sections.
Default settings shaded.
1
Basic Reload /
2
Program Reload /
3
Factory Reload
Main menu
Sub menu
Display
Function
Connect
ADDRESS
1
001-512, 001
DMX address setting
PROTOCOL
1
DMX/W-DMX
W-DMX
(not available for this
device)
DMX MODE
1
STANDARD/
EXTENDED
DMX channel mode
WIRELESS
1
WDMX ON/OFF
ON/OFF
Wireless DMX
(not
available for this device)
WDMX MODE
TRANSMITTER/
RECEIVER
TX LINK
ON/OFF
TX UNLINK
ON/OFF
RX RESET
ON/OFF
DMX TO WDMX (TX)
ON/OFF
WDMX TO DMX (RX)
ON/OFF
Set
FIXTURE
SETTINGs
1
DMX FAULT
HOLD/BLACKOUT
Run if no DMX
TEMPERATURE UNIT
Fahrenheit/Celsius
Select temperature
designation °C or °F
HIBERNATION
OFF,
01M~99M(15MIN)
Standby mode
FAN MODE
AUTO/HIGH/SILENT
Fan mode select
DIMMER CURVE
LINEAR/S-CURVE/
SQUARE/ INVERSE
SQUARE
Dimmer curve
DIMMER SPEED
AUTO/FAST/MEDIUM/
SLOW
Dimmer speed (step
response)
LED FREQUENCY
600HZ/1200HZ/2000
HZ/4000HZ/6000HZ/
25KHZ/50KHz
PWM (pulse-width
modulation)
MENU LANGUAGE
E/F/S/P/
简
/
繁
(E)
Language select
TRANSFER
CONFIGURATION
No DMX ADDRESS
Transfer settings
(without DMX start
address)
WITH DMX ADDRESS
Transfer settings
(with DMX start
address)
MOVEMENT
1
PAN REVERSE
ON/OFF
Reverse movement
TILT REVERSE
ON/OFF
P/T FEEDBACK
ON/OFF
Automatic PAN/TILT
adjustment